Here' a little diy, so you can make one, too!
Start with 17 - 3" scalloped circles. I used my making memories slice diecutting machine along with their basic shapes card to make mine. Glue the little cone shapes together using your hot glue gun.
You should come out with a total of 34 little cone shapes.
Glue two of the cones together:
Until you complete the circle.
Add glue to both sides of your final piece and squeeze it in.
Start the next layer. Place the first piece in between and slightly further in so your completed shape will be round.
Now keep going.
At this point I started looking at my ribbons and trims for something to use as a hanger. I also knew that I wanted to add a little tail ribbon on the bottom.
Add one more cone to the top edge and then glue in the hanger, before adding the final two cone shaped pieces to complete the top of the sphere.
Now flip the ornament over and repeat steps 10-13 to fill in the bottom of the sphere.
Instead of adding your hanger, add the trailing ribbon/lace for the bottom and squeeze in your last couple of cone shaped pieces.
Now make it pretty! I added some trims from Webster's Pages, Maya Road, and American Crafts and a few embellishments from the Dear Lizzy Christmas line from American Crafts.
Have fun! And if you have any questions, post them in the comments! Have a great Wednesday!